Europe's largest economy, Germany, recently activated an emergency plan to manage gas supplies that the natural gas could be rationed if supplies are disrupted or disrupted by a stand-off over Russian demands to pay for fuel in rubles.
German Vice-Chancellor, minister of economy and climate protection, said Germany's gas supplies were secure for now, but he urged consumers and businesses to reduce consumption, saying "every kilowatt of electricity counts."
Germany's gas network regulator can ration gas if supplies run short. Plants would be the first to be affected. Special treatment will be provided to private families, hospitals, and other important institutions.
Half of Germany's 41.5 million households use natural gas for heating, and industry consumption accounts for a third of the country's 100 billion cubic meters of gas demand in 2021.
The price of many energy and commodities like the Titanium Disulfide, Titanium Disulfide Overview, Titanium Disulfide Applications, Titanium Disulfide Suppliers, Titanium Disulfide Price could be affected.
Overview of titanium sulfide TiS2 powder
Titanium disulfide is an inorganic compound with the molecular formula TiS2. Brass scaly crystals with metallic luster. The density is 3.22 g/mL. Stable at room temperature, stable to water, dilute sulfuric acid and hydrochloric acid, but nitric acid and concentrated sulfuric acid will decompose into sulfur. Lithium can be inserted between the titanium disulfide layers, and the composition of the inner layer-forming compound LiTiS2 varies continuously between x=0 and 1, which is an ideal non-stoichiometric compound. Titanium disulfide is a yellow or gray powder with an unpleasant odor and is used as a solid lubricant. Contact with this substance may cause burns to skin, eyes and mucous membranes. May be toxic if swallowed, inhaled or absorbed through skin.
Titanium disulfide is prepared by reacting the elements at around 500 °C.
Ti + 2 S → TiS2
It can be synthesized more easily from titanium tetrachloride, but the purity of this product is usually lower than that obtained from the element.
TiCl4 + 2 H2S → TiS2 + 4 HCl
This route has been applied to the formation of TiS2 thin films by chemical vapor deposition. Instead of hydrogen sulfide, mercaptans and organic disulfides can be used.
Various other titanium sulfides are known.
Titanium sulfide TiS2 powder application
Titanium sulfide TiS2 powder is mainly used for lithium batteries, targets, scientific research, etc.
In 1973, the prospect of using titanium disulfide as a cathode material for rechargeable batteries was proposed. Group IV and Group V halogen compounds have attracted attention due to their high electrical conductivity. The battery originally described used a lithium anode and a titanium disulfide cathode. The battery has high energy density, and the diffusion process of lithium ions to the titanium disulfide positive electrode is reversible and rechargeable.
Titanium disulfide TiS2 powder was chosen because it is the lightest and cheapest chalcogenide.
Lithium ions diffuse the fastest in titanium disulfide.
The main problem is the degradation of the cathode after repeated use. This reversible insertion process allows the battery to recharge. Furthermore, among all the layered dihalides IV and V, titanium disulfide is the lightest and cheapest.
In the 1990s, titanium disulfide was replaced by other cathode materials (manganese oxide and cobalt oxide) in most rechargeable batteries.
Use of TiS2 Cathode in Solid-State Lithium Batteries Most Li-ion batteries use liquid electrolytes, which may pose safety hazards due to their flammability. Many different solid electrolytes have been proposed to replace these detrimental liquid electrolytes.
For most solid-state batteries, higher interfacial resistance reduces the reversibility of the insertion process and shortens the lifetime. For TIS2, these poor interface effects are no longer a problem. The power density of the all-solid-state lithium battery is 1000 W/kg, and the maximum power density for 50 cycles is 1500 W/kg. In addition, the average capacity of the battery dropped by less than 10% in 50 cycles. Although titanium disulfide has high electrical conductivity, high energy density, and high power, its discharge voltage is relatively low compared to other lithium batteries with high reduction potential cathodes.
Titanium sulfide TiS2 powder price
The price of titanium sulfide TiS2 powder will change randomly with the production cost, transportation cost, international situation, exchange rate and market supply and demand of titanium sulfide TiS2 powder. Tanki New Materials Co.,Ltd aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for titanium sulfide TiS2 powder, please feel free to send us the latest price of titanium sulfide TiS2 powder.
Titanium sulfide TiS2 powder supplier
As a global supplier of titanium sulfide TiS2 powder, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced technology and engineering materials. The company has successfully developed a series of powder materials (including oxides, carbides, nitrides, single metals, etc.), high-purity targets, functional ceramics, structural devices, and provides OEM services.
|Titanium Sulfide Properties|
|Other Names||titanium disulfide, titanium(IV) sulfide, titanium disulphide,|
|Solubility in H2O||N/A|
|Titanium Sulfide Health & Safety Information|
|Transport Information||UN 3174 4.2/PG 3|
At present, international supply chains were shocked, and logistics and transportation efficiency decreases. Geopolitical conflicts further aggravate uncertainties about the European and American economic recovery and the global commodity supply. For this reason, I assume the price of the Titanium Disulfide, Titanium Disulfide Overview, Titanium Disulfide Applications, Titanium Disulfide Suppliers, Titanium Disulfide Price would not decrease significantly in the short term.
The application of various concrete admixtures can not only improve the performance of concrete, but also promote the development of new concrete technologies, promote the application of industrial by-products in cementitious material systems, and al…
Boron carbide (B4C) is an extremely hard boron-carbon ceramic and covalent material used in tank armor, bulletproof vests, engine damage powder, and many industrial applications.…
Molecular sieves are materials with holes of uniform size (very small holes). These pores are similar in size to small molecules, so large molecules cannot enter or be adsorbed, while smaller molecules can.…